Support Kit for 350ml Ink Reservior
Include ink regulator
bulk housing, ink bracket
reglater bracket
quick coupling
ink tubing
Syringe, Syringe tubing
base for bracket
350mm hollow ventrofix
quick tube coupling
Cable fixing seat
strapping tape
butterfly screw M8*25
M3*6 Cross recessed pan head screws, M4*4 Cross recessed pan head screws, M8*16 Hexagon socketscrews, M16 Nuts
Installation Requirement 1. Make sure the ink reservoir is mounted between 18" and 22" above the bottom level of the regulator.
2. Make sure the height from regulator bottom to the nozzle plate around 1".

Support Kit for 370ml Ink Reservior
Include ink bracket
φ16*239mm stainless steel hollow ventrofix
bi-pass clamp
M16 nuts
gradienter
M3*4 Cross recessed countersunk head screw, M8*16 Hexagon socketscrews
Installation Requirement Ink housing should be located 4" below printhead